Flugzeugfahrwerk auf einem glatten Industrieboden in einer hellen Hangarhalle.

disrapid

Open to traffic after 24 hours.

Request a consultation

disrapid

Our fastest-setting floor: open to traffic after 24 hours, ready for coating after 36 hours.

Areas of application

Refurbishment projects requiring rapid loading
as a substrate for coatings
as a levelling and smoothing layer

Standard version

1.0 – 5.0 cm d i s r a p i d – Industrial flooring

Load-bearing capacity

Can be walked on after 12 hours,
Fully load-bearing after 2 days and sufficiently dry to accommodate reaction resin coatings (< 4 % residual moisture)

Surface

Sealed
non-slip
natural grey
oil and water resistant
abrasion resistance <= 10–12 cm³/50 cm²

Flatness

In line with the level of the existing concrete substrate,
if necessary, installation in accordance with DIN 18 202, Table 3, is possible subject to a specific agreement

Prism strength

d i s r a p i d – Industrial flooring

Compressive strength > 50 N/mm²
Flexural tensile strength > 6 N/mm²

Joints

Low shrinkage and low cracking, therefore seamless across the surface
Pressed joints at the exposed edges
Building joints must be formed using suitable joint profiles

Installation requirements

Substrate:
Concrete, minimum grade C20/25 (B 25) or d i s p a c – Foundation slab, surface firm, rough, open-pored, free from slurry, release films and loose particles

For the top layer:
Roof and external walls watertight and sealed, draught-free
minimum temperature +5 °C