Flugzeugfahrwerk auf einem glatten Industrieboden in einer hellen Hangarhalle.

displan

für mittlere und hohe Beanspruchungen.

Beratung anfragen displan-Datenblatt zum Download

displan

The polymer-modified industrial floor for medium to heavy-duty applications.

Areas of application

Manufacturing facilities
Warehouses
Workshops
Cargo handling facilities
High-bay warehouses
Printing works
DIY stores

Standard version

1.5 – 2.5 cm displan – industrial flooring

Load-bearing capacity

Can be walked on after 3 days,
fully load-bearing after 7 days (under standard conditions: 20°C / 65% relative humidity)
High resistance to water, oils and many chemicals

Surface

Closed
non-slip
natural grey
the surface texture is subject to regional, craftsmanship-related and building physics-related factors

Electrical conductivity

In accordance with DIN 51 953, between 104 and 107 ohms and therefore compliant with the Workplace Regulations for potentially explosive atmospheres in Zones 0, 1 and 10 (maximum permissible value: 108 ohms)

Flatness

In line with the level of the existing concrete substrate; where necessary, installation in accordance with DIN 18 202, Table 3, row 3 or 4, is possible subject to a special agreement

Prismatic strength

d i s p l a n – Industrial flooring (Standard)

Compressive strength > 50 N/mm²
Flexural tensile strength > 10 N/mm²

Joints

Seamless across the surface
compression joints at the exposed edges
Building joints must be formed using suitable joint profiles

Installation requirements

Substrate:
In-situ concrete, minimum grade C 20/25 (B 25), or alternatively dispac – base slab; surface must be firm, rough, open-pored, and free from slurry, release films and loose particles

For the top layer:
Roof and external walls must be watertight and sealed, draught-free and rainproof
Minimum temperature +5 °C