Skip to content
Request a free, no-obligation consultation now!
Request a consultation
DeutschEnglish
Flugzeugfahrwerk auf einem glatten Industrieboden in einer hellen Hangarhalle.
Flugzeugfahrwerk auf einem glatten Industrieboden in einer hellen Hangarhalle.

dispox® - R

for heavily contaminated sites
Request a consultationdispox® - R-data sheet for download
dispox® - R floor coating
dispox® - R

The floor coating for heavily used areas with sufficient slip resistance, available from R 11 to R 13.

Areas of application

  • Production halls
  • Turning shop
  • Milling shop
  • Grinding shop
  • Toolmaking
  • Facilities with oil carry-over
  • Engine and gearbox manufacturing
  • Wet areas
  • Ramps
  • Slopes
  • Loading areas

Properties

  • Three-layer epoxy resin coating with a robust, non-slip surface
  • Recommended for areas subject to heavy wear
  • Staggered installation possible
  • High installation output
  • Fully through-coloured, homogeneous surface
  • Extreme early strength, approx. 70% of the specified properties after 12–18 hours at 20°C
  • minimum layer thickness 3 mm in the middle
  • wide range of standard colours
  • significantly improved cleanability when using a special maintenance product
  • liquid-tight across the entire surface

Standard version

  • 3 mm thick, including the adhesive
  • Textured surface
  • Slip resistance class R11 – R12

Load-bearing capacity

  • up to 80 N/mm²
  • Shore D 82

Surface

  • rough
  • non-slip
  • R11 – R12

Electrical conductivity

  • non-conductive, > 109 ohms

Flatness

  • Follows the contour of the subfloor
  • Usually in accordance with DIN 18202, Table 3, Row 3

Substrate

  • Concrete or screed
  • Residual moisture < 4%
  • Adhesive tensile strength > 1.5 N/mm²

Joints

  • Seamless surfaces
  • Building joints must be incorporated
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.